When a turbo fails you'll usually have three choices: a new genuine or original-equipment unit, a remanufactured (reman) unit, or a new aftermarket turbo. Each can be the right call. Here's how they differ.
New original-equipment turbos
Built by the turbo maker that supplies the vehicle manufacturer (for example Garrett, BorgWarner, IHI or Mitsubishi Turbo) to the original specification. You get a known part number, all-new components and the maker's own warranty terms. They are usually the most expensive option.
Remanufactured turbos
A reman turbo starts as a used core. It is stripped, cleaned and inspected, and worn parts such as bearings, seals and often the shaft and wheel assembly are replaced, then the rotating assembly is balanced and the unit is tested. A good reman turbo should perform like the original.
What matters is who remanufactured it and what was replaced. Ask what new parts went in, whether the core assembly was balanced, and what warranty applies. Reman turbos are often sold on an exchange basis with a refundable core charge. See What is a core charge?
New aftermarket turbos
Made new by a manufacturer other than the original supplier, built to fit and perform like the original. They are often the lowest-cost new option. Quality varies between brands, so stick with a brand that stands behind its product with a clear warranty and published part numbers.
How to choose
- Match the part number on your existing turbo's tag, not just the engine. Turbos on the same engine can change between model years.
- Fix the cause first. Most turbo failures are caused by oil supply, contamination or a restriction elsewhere. A new turbo of any type will fail again if the cause is still there. See Why turbochargers fail.
- Think about the vehicle's future. For a vehicle you plan to keep for a long time, the extra cost of a new original-equipment unit may be worth it. For an older vehicle, a quality reman or aftermarket unit is often the sensible choice.
- Check the warranty terms and what you need to show for a claim, such as proof of an oil and filter change at fitting.
Fitting tips
- Change the engine oil and filter, and replace the oil feed line if it is old or the old turbo failed from oil starvation.
- Clean or replace the intercooler and pipes if the old turbo shed pieces.
- Prime the new turbo with clean oil before first start, and let the engine idle for a minute before driving.
